Under the direction of the Operations Manager, the Journeyman Lineman is responsible for building, maintaining, and repairing overhead and underground power distribution lines within the safe and efficient manner and within accepted operation standards in order to provide reliable service to the member in the operation and maintenance of the electrical system.

We are looking for an Assembler who will be a part of a highly motivated team, working on the assembly of outstanding products. You will be able to perform the job functions and possess the skills and knowledge to work in five to eight of the following areas: Bolt Packing, Box Packing, Small Parts Assembly, Hose Assembly, Gang Building, Gang Bar Assembly, Gang Shaft Cell, or Setup. Being a team player and having the willingness to make suggestions for constant improvement in both processes and safety is key to being successful.

All positions are available on 1st Shift:
Monday – Friday: 6am – 4:30pm daily
Overtime as needed.

Responsibilities

All Areas
- Maintain a neat, clean and organized work area
- Work according to all company safety rules and regulations
- Participate and contribute in a team environment in an effort to reduce costs and help promote other
company objectives
- Must have good attitude and willingness to accept new assignments, such as working in either plant or
other departments as needed
- Must have good attendance and be willing to work the hours to get the product out
- Must be quality conscious and check parts and/or completed product for imperfections
- Must have a good sense of balance and be able to work from heights of up to 14 ft.
- Properly use and care for all tools

Bolt and Box Packing
- Count parts accurately and report completions using the computer system
- Must be able to weigh packages within the weight tolerances allowed

Small Parts Assembly/Gang Building/Gang Bar Assembly
- Must be able to interpret shop drawings and assemble parts according to assembly procedures
- Must also be able to operate pneumatic tools

Hose Assembly
- Count parts accurately and report completions using the computer system
- Requires previous education or training on hydraulic systems
- Must be able to use a micrometer to verify correct crimping measurements
- Must be able to weigh packages within the weight tolerances required

Setup
- Must be able to read and understand assembly instructions
- Must be able to operate pneumatic tools

Gang Shaft Cell
- Must be able to use a tape measure, change drill bits, and saw blades
- Must be able to understand a GO/NOGO Gauge
- Pass weld test for gang bolts
- Must be able to change, sharpen, and set chasers
- Must know when machines are out of alignment

Skills & Abilities
- Must be able to write legibly and demonstrate good communication skills
- Must have basic math skills
- Must have basic mechanical knowledge and ability to use hand tools
- Must have a basic understanding of single part engineering drawings
- Must have ability to operate a forklift
- Must be able to operate an overhead hoist (except for Hose Assembly area)

Education and/or Experience
- High School Diploma or General Education Degree (GED) preferred

Physical Requirements
- Stand and walk frequently
- Use hands to handle or feel; reach with hands and arms; climb or balance; stoop, kneel, or crouch
- Vision abilities required include close vision, distance vision, peripheral vision, and depth perception
- Bolt Packing Area and Hose Assembly Area - minimum lifting requirement of 50 lbs.
- All other areas of Assembly - minimum lifting requirement of 70 lbs.

Benefits
Our client, AGCO Corporation, offers competitive benefits including options and choices to fit your needs such as medical, dental, prescription drug, life and accident insurance, long and short-term disability, matching 401k plan, employee assistance program, and discounted home and auto insurance.


Note: Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time.

AGCO Corporation is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled, or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

This full-time position is focused on providing quality service to our customers thru answering phones, greeting customers and processing grain purchase payments all while being professional, friendly and ensuring customer satisfaction. This position also maintains a variety of reports and files and assists in various other administrative office duties.

The successful candidate should have:
• Customer relation skills & enjoy people
• Organizational skills and attention to detail
• Excellent communication skills
• Proficient computer skills with knowledge of Microsoft Office
• Positive attitude and ability to work with a diverse group of people in a team setting
• Be flexible & adaptable
• Problem Solving skills
• Minimum 2 years office experience and/or post high school education

AgMark LLC is a profitable company offering an excellent benefit package including competitive wages, 401k, Co-op retirement, Health & Dental Insurance, PTO and more.

Company Description

Finn-Kool is a fast growing company looking for determined and reliable people who take pride in their work.

We care for the people who are investing their careers and lives, that’s why we pay 100% healthcare for every one of our employees, paid time off, paid holidays, and more!

Role

In this role, you will read blueprints or technical drawings and make adjustments for each job. You need to be able to read a tape measure and perform basic math to set stops and guides to the specified length of each job. While you operate the machine, it is important to look for any defects or issues.

Responsibilities

Reads and interprets basic blue prints.
Completes stock inventory reports.
Maintains proper inventory levels of materials
Unload raw materials from semi-trucks and store material.
Maintains equipment and ensures work area is always clean and safe.
Performs basic preventative maintenance on saw equipment.
Accurately complete paperwork
Assures compliance with appropriate safety practices and procedures and with applicable federal, State and local codes
Contributes to team effort by accomplishing related results as needed.
Operates over head crane and use of forklift.

Expectations

The role of this position is to know how to operate and set up machines. They ensure efficiency and correct operation of the machine. Whenever the machine malfunctions, they can bring it back into working order by using resources available to them. They make fast, accurate decisions relating to the production process and equipment. They should understand the details of the product to be manufactured, such as the product size and use. Quality standards must be strictly adhered to, so attention to detail is extremely important. A laser machine operator may frequently use a chart to perform routine checks and maintenance on machines to make sure they are always in working order. Attention to time constraints is also important, as projects need to be completed in a timely and quality manner.

Qualifications:

Previous experience preferred, will train
Familiarity with plant tools and equipment
Strong troubleshooting and critical thinking skills
Ability to handle physical workload
Ability to thrive in a fast-paced environment.
Background in the industrial metal industry preferred.
High school diploma or GED certificate
Experience operating a saw (1-3 years preferred)
Forklift experience a plus
Basic math skills
Ability to lift up to 50-70 lbs.
Attention to detail

 Full Time, Day Shift 8 am to 5 pm with overtime opportunities

Required Education: - High School Diploma or GED

Compensation: - $15.00to $23.00 /hour Dependent on Experience

Benefits:

- Medical/Dental Insurance

- Paid Time Off

- 401k

-Paid Holidays

- Supplementary Insurance Options

-Boot and eyewear stipend

Job Type: Full-time

Laser Operator

Role

The role of this position is to manufacture metal products using machines that employ lasers and computerized equipment. It is important that someone in this position always pays attention to the machine to ensure that it is working properly. They are responsible for the daily setup and operation of one or more CNC cutting machines. They will also assist other CNC operators with any of their daily duties including area housekeeping, maintenance work, part’s cleaning and material staging.

Responsibilities

Responsible to Set up, operate, shut down procedures and maintain CNC lasers to produce parts using setup instructions, shop orders and prints
Facilitate work-order paper flow in accordance with company quality standards
Download laser programs and modify them, as needed, to optimize performance and part yield
Locates and verifies material required to produce parts per shop order, may recommend material sheet change to optimize part yield or to take advantage of drop-off material
Enters machine settings for laser cutting operation to ensure correct lens, nozzle, assist gases and laser head are in place
Monitors equipment performance throughout cycle to ensure optimal operation of laser and reports to supervisor any maintenance needs
Conducts tests and inspections of products, services, or processes to evaluate quality or performance
Inspects and measures parts to maintain quality records including verifying set-up piece and submission to Quality of 1st article for inspection or other required quality procedures
Observes levels of assist gasses, changes tanks as required and recommends supply requirements for daily production
Deburrs parts or performs other secondary operations during machine cycle, when needed
Stack or load finished items on palates and rout to correct next routing step departments
Confer with supervisors or programmers to resolve machine malfunctions or production errors or to obtain approval to continue production.
Implement changes to machine programs, and enter new specifications, using computers
Set up future jobs while machines are operating.
Clean machines, tooling, or parts, using solvents or solutions and rags.
Considering the relative costs and benefits of potential actions to choose the most appropriate one
Use logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems.
Stage raw materials at each work-center for the day’s production
Load and unload machines
Maintain daily dust collector service and associated logbook in assigned area and report equipment deficiencies
Ensure production schedule follow through as allocated by the scheduling department.
Assist in loading and unloading team members’ machines when production requires additional manpower to maintain throughput
Perform minor maintenance and cleaning of cutting equipment and work area in accordance with company standards and manufactures machine recommendations.
Perform some machine alignment procedures and optic cleaning to keep equipment at peak operating performance
Make sure management is aware of any inventory items needed to reorder to maintain operation of machine
Other duties assigned by Lead/Supervisor or Management


Expectations

The role of this position is to know how to operate and set up machines. They ensure efficiency and correct operation of the machine. Whenever the machine malfunctions, they are able to bring it back into working order by using resources available to them. They make fast, accurate decisions relating to the production process and equipment. They should understand the details of the product to be manufactured, such as the product size and use. Quality standards must be strictly adhered to, so attention to detail is extremely important. A laser machine operator may frequently use a chart to perform routine checks and maintenance on machines to make sure they are always in working order. Attention to time constraints is also important, as projects need to be completed in a timely and quality manner.





Full Time, Day Shift 6 am to 2:30 pm with overtime opportunities

Required Education: - High School Diploma or GED

Compensation: - $15.00 to $25.00 /hour Dependent on Experience

Benefits:

- Medical/Dental Insurance

- Paid Time Off

-401k

- Supplementary Insurance

Job Type: Full-time

Experience:

Laser Operator: 1 years (Required)
Education:

High school or equivalent (Required)

Company Description

Finn-Kool is a fast growing company looking for determined and reliable people who take pride in their work.

We care for the people who are investing their careers and lives, that’s why we pay 100% healthcare for every one of our employees, paid time off, paid holidays, and more!



Role

A Human Resources Officer, or HR Supervisor, is responsible for coordinating all administrative activities related to an organization’s personnel. Their duties include developing recruitment strategies, implementing and maintaining systems for managing staff benefits, payroll, assessments and onboarding/offboarding new employees. This position is vital to the internal success of the organization.

Responsibilities

Overall responsibility for payroll processing and administration
Verification & Reconciliation of monthly payroll
Manage the staffing process i.e.: recruiting, setting up interview schedule, onboarding and offboarding procedures that are outlined in BambooHR.
Ensure job descriptions are up to date
Develop/Maintain training materials and performance management programs to help ensure employees understand their job responsibilities
Assist management to address health, safety, and worker-management issues, including compliance with federal workplace laws
Provide paperwork to parties associated Workman’s Comp claims
Provide information and related forms to parties associated for Employer provided benefits
Design programs to reward employees for accomplishments and motivate them to continue performing at a high level
Provide assessment schedule to managing team and employees for employee job performance feedback using BambooHR application.
Manage certain time bound processes and ensure validation of data to be accurate and truthful i.e. W-4, I-9


Expectations

To provide a high-quality service to individuals (managers and employees) and to contribute to the long-term development of the HR function ensuring a consistently high level of employee care is provided to all individuals and people who use the HR Service; also provide an effective and efficient output of work to meet the demands made of the role, and to assist in all aspects of the work undertaken by the Human Resources Department.





Full Time, Day Shift 8 am to 5 pm with overtime opportunities

Required Education: - High School Diploma or GED

Compensation: - $20.00 to $30.00 /hour Dependent on Experience

Benefits:

- Medical/Dental Insurance

- Paid Time Off

- 401k

-Paid Holidays

- Supplementary Insurance Options



Job Type: Full-time

Company Description

Finn-Kool is a fast growing company looking for determined and reliable people who take pride in their work.

We care for the people who are investing their careers and lives, that’s why we pay 100% healthcare for every one of our employees, paid time off, paid holidays, and more!



Role

As a Welder you will be responsible for performing all position welding on products in accordance with code requirements, alignment and dimensional specifications, working from drawings, specifications and/or material specification codes, selecting welding procedures and technique best suited to the type of work and materials involved to obtain proper penetrations, fusion and strength, offset distortion and maintain alignment, using MIG, TIG, and plasma cutting equipment. Material types will include various grades and surface finishes of metals.

Responsibilities

Competency in TIG welding processes
Trained in hand tool, torch, and arc welding equipment
Welding safety guidelines
Safety guidelines when cleaning tools and equipment
Using work orders, and blueprint layouts to complete work
Proficiently layout and weld plates
Read and follow the production schedule
Safely operate jib and overhead cranes
Able to work with little supervision
Checking welds to make sure it falls within the tolerances marked on the blueprint
Prolonged periods of standing, walking, stooping, kneeling, crouching or climbing
Better weld processes


Expectations

A Welder should have patience, ensuring the welding process is accurately completed while adapting quickly if things change around them during work hours. A good Welder is self-directed, always looking ahead and is detail oriented.





Full Time, Day Shift 6 am to 2:30 pm with overtime opportunities

Required Education: - High School Diploma or GED

Compensation: - $25.00 to $35.00 /hour with completion of successful weld test

Benefits:

- Medical/Dental Insurance

- Paid Time Off

-401k

- Supplementary Insurance

-Boot and eyewear stipend



Job Type: Full-time

Job Summary

We are recruiting a full-time Maintenance Technician for our location in Beloit, KS. This is a direct hire position on 1st shift that offers competitive benefits including options that fit your needs. In this role, you will be a part of a highly motivated team working on maintaining the machinery that keeps our world-class operation running at high efficiency.

Responsibilities
• Must demonstrate good communication skills.
• Must have a good attitude and be willing to accept new assignments.
• Perform final electrical hookups and/or electronic repairs in accordance with all OSHA and NEC requirements.
• Observe all company safety rules and regulations. Report all safety concerns observed plant-wide to the maintenance supervisor.
• Must be willing to work the hours needed to complete projects.
• Support maintenance personnel in the fabrication and completion of projects
• Maintain and repair specialized mechanical equipment and machinery.
• Maintain and repair building structures and work on plumbing, electrical, and HVAC.
• Many job duties are not listed here, must be self-motivated and willing to take on various tasks as they may arise.

Skills and Abilities
• Must Demonstrate good communication skills.
• Must have a good attitude and be willing to accept new assignments.
• Must be able to perform clerical administration functions when asked or required.
• Must have a good understanding of mechanical, hydraulic, and pneumatic systems.
• Must demonstrate good leadership skills and the ability to train others.

Education
• High school diploma or general education degree (GED) is required.

Physical Requirements
• Must be able to lift 50 lbs.
• Must be willing to work in all aspects of maintenance.
• Must be willing to work in all weather conditions.
• Must be able to work from man-lifts at fairly high elevations.

Benefits
• Matching 401k Plan
• Dental
• Medical
• Prescription drug
• Life and accident insurance
• Long- and short-term disability
• Employee assistance program
• Discounted home and auto insurance

To learn more about this opportunity, give us a call at (785) 626-8643

Note: Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time.

We are proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled, or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

Job Summary

We are looking for a Fabrication Operator who will be a part of a highly motivated team, working on the fabrication of parts for seeding and tillage products. Your job responsibilities will include: reading and interpreting shop drawings, safely and properly using lathes, CNC machines, presses, and/or welding equipment, using various measuring and calibration devices, and ensuring overall product quality. Being a team player and a willingness to make suggestions for constant improvement in both processes and safety are a key for being successful.


All positions are available on 1st Shift:
Monday – Friday: 6am – 4:30pm daily
Overtime as needed.


Responsibilities

• Program and operate fabrication machines
• Run bend and forming operations using standard and custom punches
• Checks height, depth, and thickness using micrometers, dial indicators, calipers, gauges, and other precision-measuring instruments
• Work with tight tolerances
• Reading blueprints and diagrams and conducting first/last piece inspection
• Adjusting machine settings to meet job specifications
• Responsible for machine operation and transferring finished goods to appropriate pallet/cart for transport to other departments
• Proper and safe set up, operation, and calibration of CNC machines
• Work independently, maintaining timely machine set up and finishing transfer of product
• Perform Quality Assurance of the machine operation in order that product is modified per blue print specifications
• During machine run times, monitors control settings for appropriate machine readings
• Notifies management of product discrepancies, equipment malfunctions, and/or personal injuries
• Regular and predictable attendance is required
• Adheres to all company policies and procedures paying special attention to safety regulations

Skills & Abilities
• Good organization skills, ability to work on multiple assignments simultaneously
• Basic math skills
• Demonstrated strong verbal and written communication skills
• Demonstrated leadership skills, showing motivation, organization, and accountability
• Function as part of a team, both direct and cross-functional
• Strong work ethic and able to work under minimal supervision
• Detail oriented
• Available to work extended hours as required

Education and/or Experience
• High School Diploma or equivalent

Physical Requirements
• Must wear proper personal protective equipment (PPE): Steel-toe boots, protective eyewear, hearing protection and hand protection
• Ability to stand for long periods of time
• Ability to lift up to 50 lbs.
• Withstand environmental temperatures working inside and outside

Benefits

Our client, AGCO Corporation, offers competitive benefits including options and choices to fit your needs such as medical, dental, prescription drug, life and accident insurance, long and short-term disability, matching 401k plan, employee assistance program, and discounted home and auto insurance.

Note: Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time.

AGCO Corporation is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled, or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

Job Summary

We are looking for a Welder to be a part of a highly motivated team working on welding everything from larger planter frames to small fabricated parts for seeding and tillage equipment. Your job responsibilities will include: reading, interpreting, and performing welding techniques to fabricate parts, mechanical knowledge and use of hand tools, loading jigs, and welding small parts. Certain positions require the ability to utilize computer based software operating the robotic machine. Being a team player and a willingness to make suggestions for constant improvement in both processes and safety are a key for being successful.


All positions are available on 1st Shift:
Monday – Friday: 6am – 4:30pm daily
Overtime as needed.


Responsibilities
• Reading, interpreting and performing welding techniques to fabricate parts to be used in the manufacturing of product. This includes possessing basic mechanical knowledge and use of hand tools; following instruction on how to load jigs, and weld small parts.
• Keeping tools and equipment in good working order
• Competent in welding as well as ability to utilize computer based software operating the robotic machine
• Use of measuring tools used by AGCO welding department
• Use of cutting equipment as deemed necessary and understanding hard welding
• Maintain proper product counts and report them as required in a timely manner
• Perform re-work or corrections as necessary to ensure a product meets specifications
• Willingness to be moved to another area of the plant as needed for productivity objectives
• Must be able to complete paper work that ensures good communication skills, both written and through reports
• Regular and predictable attendance is required
• Adheres to all company policies and procedures paying special attention to safety regulations

Skills & Abilities
• Applicants must demonstrate competence in welding skills prior to job hire. Post hire testing is required.
• Good organization skills, ability to work on multiple assignments simultaneously
• Basic math skills
• Demonstrated strong verbal and written communication skills.
• Demonstrated leadership skills, showing motivation, organization and accountability.
• Function as part of a team, both direct and cross-functional.
• Strong work ethic and able to work under minimal supervision
• Detail oriented
• Available to work extended hours as required


Education and/or Experience
• High School Diploma or equivalent preferred

Physical Requirements
• Must wear the proper personal protective equipment (PPE): Steel-toed boots, protective eyewear, hearing protection, welders mask/shield, welding sleeves, and hand protection.
• Ability to use pliers and hand tools
• Ability to stand for long periods of time
• Ability to lift up to 50 lbs.


Benefits

Our client, AGCO Corporation, offers competitive benefits including options and choices to fit your needs such as medical, dental, prescription drug, life and accident insurance, long and short-term disability, matching 401k plan, employee assistance program, and discounted home and auto insurance.

Note: Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time.

AGCO Corporation is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled, or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

Job Summary

We are looking for an Assembler who will be a part of a highly motivated team, working on the assembly of outstanding products. You will be able to perform the job functions and possess the skills and knowledge to work in five to eight of the following areas: Bolt Packing, Box Packing, Small Parts Assembly, Hose Assembly, Gang Building, Gang Bar Assembly, Gang Shaft Cell, or Setup. Being a team player and having the willingness to make suggestions for constant improvement in both processes and safety is key to being successful.

All positions are available on 1st Shift:
Monday – Friday: 6am – 4:30pm daily
Overtime as needed.


Responsibilities

All Areas

• Maintain a neat, clean and organized work area
• Work according to all company safety rules and regulations
• Participate and contribute in a team environment in an effort to reduce costs and help promote other company objectives
• Must have good attitude and willingness to accept new assignments, such as working in either plant or other departments as needed
• Must have good attendance and be willing to work the hours to get the product out
• Must be quality conscious and check parts and/or completed product for imperfections
• Must have a good sense of balance and be able to work from heights of up to 14 ft.
• Properly use and care for all tools

Bolt and Box Packing

• Count parts accurately and report completions using the computer system
• Must be able to weigh packages within the weight tolerances allowed

Small Parts Assembly/Gang Building/Gang Bar Assembly

• Must be able to interpret shop drawings and assemble parts according to assembly procedures
• Must also be able to operate pneumatic tools

Hose Assembly

• Count parts accurately and report completions using the computer system

• Requires previous education or training on hydraulic systems
• Must be able to use a micrometer to verify correct crimping measurements
• Must be able to weigh packages within the weight tolerances required

Setup

• Must be able to read and understand assembly instructions
• Must be able to operate pneumatic tools

Gang Shaft Cell

• Must be able to use a tape measure, change drill bits, and saw blades
• Must be able to understand a GO/NOGO Gauge
• Pass weld test for gang bolts
• Must be able to change, sharpen, and set chasers
• Must know when machines are out of alignment

Skills & Abilities

• Must be able to write legibly and demonstrate good communication skills
• Must have basic math skills
• Must have basic mechanical knowledge and ability to use hand tools
• Must have a basic understanding of single part engineering drawings
• Must have ability to operate a forklift
• Must be able to operate an overhead hoist (except for Hose Assembly area)

Education and/or Experience

• High School Diploma or General Education Degree (GED) preferred

Physical Requirements

• Stand and walk frequently
• Use hands to handle or feel; reach with hands and arms; climb or balance; stoop, kneel, or crouch
• Vision abilities required include close vision, distance vision, peripheral vision, and depth perception
• Bolt Packing Area and Hose Assembly Area - minimum lifting requirement of 50 lbs.
• All other areas of Assembly - minimum lifting requirement of 70 lbs.

Benefits

Our client, AGCO Corporation, offers competitive benefits including options and choices to fit your needs such as medical, dental, prescription drug, life and accident insurance, long and short-term disability, matching 401k plan, employee assistance program, and discounted home and auto insurance.

Note: Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time.

AGCO Corporation is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled, or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.

Job Summary

We are looking for a Painter to be a part of a highly motivated team working on painting parts and equipment for seeding and tillage equipment. Your job responsibilities will include preparing parts and equipment for painting, maintaining clean gauges, painting tools and work areas for the best looking, most professionally finished final products. Being a team player and a willingness to make suggestions for constant improvement in both processes and safety are a key for being successful.

All positions are available on 1st Shift:

Monday – Friday: 6am – 4:30pm daily

Overtime as needed.


Responsibilities

Prepare surface (s) to be painted

Observe machine gauges, paint tools / equipment operation and paint application to detect defects or deviations from standards, and make adjustments as necessary

Determine paint flow, viscosity, and coating quality by performing visual inspections, or by using viscometers

Weigh or measure chemicals, coatings, or paints before adding them to machines

Select appropriate coatings, paints, or sprays, or prepare them by mixing substances according to formulas, using automated paint mixing equipment

Set up and operate and clean paint tools / machines to paint or coat products with such materials in accordance with standards and expectations

Effectively and efficiently apply paint using appropriate equipment in accordance with paint specifications and quality requirements which the painter must visually recognize



Skills & Abilities

Basic understanding of Electrostatic Paint Controls and Application

Must be able to apply liquid topcoat in accordance with Quality Standards



Education and/or Experience

At least 1 year related work experienced (working in a manufacturing / production environment, or working in a painter role)



Physical Requirements

Must be able to pass a Pulmonary Function Test; Medical Questionnaire provided by the EHS Department

Must be able to pass a Qualitative Fit Test for use of Respirator; Fit Test provided by the EHS Department


Benefits

Our client, AGCO Corporation, offers competitive benefits including options and choices to fit your needs such as medical, dental, prescription drug, life and accident insurance, long and short-term disability, matching 401k plan, employee assistance program, and discounted home and auto insurance.

Note: Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time.


AGCO Corporation is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled, or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment.